SPECIFICATIONS
VLAN: 10 ports Support VLAN
Transmission Rate: 10/100/1000Mbps
Switch Type: Gigabit Switch
Switch Capacity: 10G/16G/20G
Package: Yes
Origin: Mainland China
Number of Interfaces: 10
Model Number: KF1005G/KF1008G/KF1010G
Function 9: Fast Ethernet Switch
Function 8: Gigabit Network Switch
Function 7: Antminer s17
Function 6: Network switch
Function 5: Miner bitcon
Function 4: Ethernet switch
Function 32: gigabit ethernet switch
Function 31: switch gigabit
Function 30: Home Monitor
Function 3: Switch ethernet
Function 29: Expansion network port
Function 28: Office
Function 27: Dormitory
Function 26: for home
Function 25: Switch gigabit ethernet
Function 24: Switch lan
Function 23: Switch poe
Function 22: Switch 1000mbps
Function 21: 1000 mbps switch
Function 20: Switch ethernet 1000 mbps
Function 2: Switch
Function 19: Switch rj45
Function 18: Lan switch
Function 17: Poe switch
Function 16: Gigabit Switch
Function 15: Kuwfi
Function 14: 10/100/1000mbps switch
Function 13: Desktop Switch
Function 12: Mini desktop switcher
Function 11: RJ45 LAN Hub switch
Function 10: 5/8/10 Port Fast Ethernet Switch
Function 1: Switch gigabit
Function: VLAN Support
Communication Mode: Full-Duplex
Brand Name: KuWFi
5 Ports Gigabit Network Switch
RJ45 Port:5*10/100/1000M(Auto MDI/MDIX)
AC In: 100V-240V 50HZDC Out: 5V 1A(External power adapter)
Bandwidth:10G full duplex
Data Pin:12 36 45 78
Distance:100 Meters
MAC Address:2K
Agreement:IEEE802.3u,IEE 802.3x
8 Ports Gigabit Network Switch
RJ45 Port:8*10/1001000M(Auto MDI/MDIX)
AC In: 100V-240V 50HZDC Out: 5V 1A(External power adapter)
Bandwidth:16G full duplex
Data Pin:12 36 45 78
Distance:100 Meters
MAC Address:2K
Agreement:IEEE802.3u,IEE 802.3x
10 Ports Gigabit Network Switch
RJ45 Port:10*10/1001000M(Auto MDI/MDIX)
AC In: 100V-240V 50HZDC Out: 5V 1A(External power adapter)
Bandwidth:20G full duplex
Data Pin:12 36 45 78
Distance:100 Meters
MAC Address:2K
Agreement:IEEE802.3u,IEE 802.3x
FAQ:
Q1: After the computer is directly connected to the router, the Internet can be accessed normally, but the computer cannot access the Internet when it is connected to the router through the network switch?
A1: After connecting to the network switch, the computer cannot access the Internet. The reasons for this may include: unstable physical connection, improper computer settings, etc. Please follow the steps below to eliminate:
1) Replace the network cable between the computer and the switch to ensure that the corresponding indicator light of the switch is on and the local connection is stable. Checking method: Connect two computers to the switch and set them on the same network segment. If they can ping each other, the connection between the computers and the switch is stable.
2) Set the computer's local connection to obtain IP automatically (provided that the front-end router enables the DHCP server), right-click the local connection properties, select Internet Protocol (TCP/IP), and click the Properties button.
3) Check "Obtain an IP address automatically", then OK.
4) When the computer obtains the IP normally, it can surf the Internet normally.
5) If you still cannot access the Internet after obtaining it normally, please check the relevant settings of the front-end router to see if the computer is blocked from accessing the Internet.
6) If the IP address cannot be obtained normally, replace the network cable between the switch and the router.
